July 17, 2020 - created by jianguan ccc,
1 like, 0 followers, 1 member, 1 view
Stained, faded and marked PVC cabinet board surfaces make a property appear rundown, affecting the attractiveness of businesses to customers and of rental properties to prospective tenants. Not many... moreStained, faded and marked PVC cabinet board surfaces make a property appear rundown, affecting the attractiveness of businesses to customers and of rental properties to prospective tenants. Not many people know that you can paint PVC surfaces as we are often asked “can you paint plastic window frames“.
PVC surfaces on a property include:
PVC Pipework
PVC Guttering
PVC Doors
PVC Windows, ledges and frames
PVC Soffits and facia boards
Ensuring these surfaces are clean and tidy could be the difference between customers visiting your business and using your services or walking on by to the competition – easy to do in such a competitive market on the high street.
Using Zinsser’s products, this can be a quick process without much downtime or disruption to customers and staff, needing just a few hours between coats and products to allow for sufficient preparation and drying.
Zinsser listens to contactors and develops new products – or adds features to existing products – to meet their changing needs, delivering world class products that meet “real world” challenges, providing tried and tested solutions to painting problems, such as painting over PVC. Their Bulls Eye 1-2-3 primes PVC surfaces without flaking, cracking or peeling, and can be painted over with topcoats available in more than 350 colors.
September 2, 2020 - created by Gold Eagle,
1 like, 0 followers, 1 member, 2 views
Consider all of your cap manufacturing machine options: This includes food and drink machines, bulk vending, and specialty vending.
Find the right location for your vending machines: Consider... moreConsider all of your cap manufacturing machine options: This includes food and drink machines, bulk vending, and specialty vending.
Find the right location for your vending machines: Consider locations where you feel motivated to use a vending machine. Then work out an agreement with the proprietor.
Find your vending machine: Vending machine sellers include manufacturers and wholesalers, secondary market retailers, and online resellers.
Stock your vending machine with inventory: Consider site-specific needs when purchasing inventory for your machine. Also, don’t over-order stock in the beginning.
Explore your vending machine business financing options: The best financing options include a short-term loan, equipment financing, and inventory financing.
Make the right investments in vending machine tools: A successful operation requires you to invest in tools that will help you run your business more efficiently, as well as prioritizing customer service.
If you are interested in two cans, welcome to your come and purchase! less
July 30, 2020 - created by Gold Eagle,
2 likes, 0 followers, 1 member, 1 view
Those who deal with the packaging in this delicate cap manufacturing machine industry, know well This is CanTech's senior expert David Hayes, reporting on the status and potential of my country's can... moreThose who deal with the packaging in this delicate cap manufacturing machine industry, know well This is CanTech's senior expert David Hayes, reporting on the status and potential of my country's can industry. At present, many canning companies in my country still use their own empty cans, which is unreasonable in terms of resource allocation. With the passage of time, many canners no longer prepare empty cans, so the development of food cans will have great market potential. The advancement of can making technology by professional can making machine enterprises is crucial to the development of the canning industry, and often plays a decisive role in the quality and taste of canned food. Although the reported data may be somewhat inaccurate. For example, the production of self-provided empty cans of various canning companies may not be included in the statistics; there may be errors in the reports on the production volume and production capacity of some companies, but the translator believes that the article has certain reference value. This article analyzes beverage cans, beer cans, food cans and miscellaneous cans. The following translators introduce the beverage cans and food cans of this article to everyone for reference.
Mr. David Hayes reported that China's sustained and rapid economic growth has promoted the growth of demand for canned food in some major cities in the southeastern provinces. Although the annual growth rate of canned food consumption is still lower than the economic growth rate, canners optimistically predict that the metal can packaging industry will continue to develop until the 2008 Olympic Games.
According to the China Metal Packaging Association, China annually produces about 17.5 billion empty cans, of which 60% are three-piece cans and 40% are two-piece cans. In the past few years, the growth of three-piece cans has exceeded that of two-piece cans, because the cost of aluminum restricts the two-piece cans.that it’s always difficult to assess which machinery is best suited to your needs. However, to choose the best solutions it’s possible to make a careful evaluation of the features of the machine and its functions. So, what are the factors that should be considered to carry out this evaluation and thus choose the most effective can making machine for one’s needs? Here some tips:
Evaluate the type of product to be packaged
Consider the conservation needs that must be guarantee
Choose the machinery based on the packaging to be made
Take the time/quality ratio into account
The two cans is also one of our products, welcome to come and purchase! less
August 20, 2020 - created by jianguan ccc,
1 like, 0 followers, 1 member, 1 view
The material properties of PVC celuka board, including light weight and rigid structure, make them robust both for outdoor use and interior finish, being immune to rain and resistant to wind and... moreThe material properties of PVC celuka board, including light weight and rigid structure, make them robust both for outdoor use and interior finish, being immune to rain and resistant to wind and sunlight. By insulating the basement on the concrete block with rigid pvc board, extra living space can be added. And the installation process is easy and follows the same installation procedures, but it still requires people's attention.
Measuring the area of the room by running a tapeline along the first wall is necessary. Write down the measurement of the width and the height of the wall from the floor to the ceiling. At last, work out the total square footage of the first side of the room by multiplying the two measurements. After the measurement, check the foundation for cracks or leaks and seal any with concrete patching compound or aerosol expanding foam insulation.
After the basic work, caulk around the rim joist and any pipes, wiring or vents, then use aerosol expanding foam insulation and apply it by using the extension nozzle which comes with the foam. Next, position rigid foam boards vertically against the wall and use a level to make sure that they are flush and plumb against the foundation. The edges are recessed to form a channel for installing the furring strip. Measure and mark the wall every sixteen inches for the furring strips. Insert masonry screws into the furring strips with a power drill. Hold the first furring strip in place at the mark and insert a screw every eight inches down the middle of the board to secure it to the concrete. Move down sixteen inches and install the second furring strip the same way. Continue around all the walls until the strips are all attached.
The installation of foam board should be around electrical outlets. Then place the board in position in front of the outlet rough-in and press. The outlet will leave an impression on the back of the foam board, which is then easily cut by using a utility knife. Install drywall panels over the foam board insulation and attach the drywall to the furring strips with masonry drywall screws. Tape the seams of the drywall. Apply drywall mud to the taped seams and the impressions left by the screws. When dry, sand lightly and paint the drywall with regular interior wall paint.
If you are interested in 4x8 pvc foam sheet, welcome to your come and purchase! less
May 29, 2020 - created by gao bao,
1 like, 0 followers, 1 member, 2 views
A1. How do I choose the right fully automatic heat transfer printing machine?
Before deciding on which Heat Transfer Press to choose it is first important to understand the two main types of Heat... moreA1. How do I choose the right fully automatic heat transfer printing machine?
Before deciding on which Heat Transfer Press to choose it is first important to understand the two main types of Heat Transfer Machinery:
Complete Hierarchy of Easty Heat Transfer Machines
Platen presses are often used for printing on individual pieces such as cut apparel parts, T-shirts, sports apparel, tote bags, etc. Platen presses are also used to print on rigid substrates such as wood, metals and ceramic tiles.
Rotary Drum Transfer Machines are often used to print fabric continuously (roll to roll) and to print large fabric parts such as signs and banners which may be too large for a standard platen press. Drum machines can also be used to print sports apparel and other cut apparel parts. Drum machines are more productive than platen machines for sublimation printing on cut apparel parts and are therefore used when production volume is high. Drum machines are not used however to print onto rigid substrates such as wood, metal or ceramic tile.
Choose the right Heat Transfer Printing Press depends on a number of factors:
1) Types of Product being printed
2) Print Size
3) Production Requirements
If you wish to print full coverage on 60" wide yard goods a Rotary Drum Heat Transfer machine is required. T-shirts, mugs, wood or tile are best printed on a platen machine. Cut apparel parts can be printed on either a platen press or a rotary drum machine. Production requirements often dictate which type of machine is used. Banners and soft signage are often printed on a rotary drum machine.
Use our heat transfer press search to help narrow your heat transfer printing choices based on your printing production needs.
Let us know your application and we will be happy to recommend the right machine for your particular needs.
See our Introduction Guide to Heat Transfer Machines for further reading.
A2. What's the difference between a Rotary Drum Heat press verses Platen Heat presses?
Platen presses are often used for printing on individual pieces such as cut apparel parts, T-shirts, sports apparel, tote bags, etc. Platen presses are also used to print on rigid substrates such as wood, metals and ceramic tiles.
Rotary Drum Heat Presses are often used to print fabric continuously (roll to roll) and to print large fabric parts such as signs and banners which may be too large for a standard platen press. Drum machines can also be used to print sports apparel and other cut apparel parts. Drum machines are more productive than platen machines for sublimation printing on cut apparel parts and are therefore used when production volume is high. Drum machines are not used however to print onto rigid substrates such as wood, metal or ceramic tile.
A3. What are the typical life cycles of the heat transfer press heating elements and how difficult are they to replace?
The electric heating elements are not very hard to change. The side of the heat transfer drum opens up and the element cage assembly slides out. Generally speaking it would take about 3 - 5 hours or so to pull out the element cage and replace the elements.
How long the elements last depends on how often the machine is used. Generally speaking we expect elements to last about 3 to 5 years with normal use of 8 hours a day 5 days a week. Elements (complete set or individual pieces) can be purchased from us.
A4. Are there any special considerations as to where the machine should be installed in our production plant?
We recommend that the machine not be located right against a wall. Room is needed around the machine for servicing and for removing of the element cage. Four or five feet off a wall should be good. You will also want to have room in front of the machine for loading and in back for unloading. The press should also be located where there are no noticeable drafts which can affect its proper operation.
No special venting is required as Dye-sublimation fumes are non -toxic. However, many but not all of our customers do put a hood over the machine and vent to the outside. less
July 2, 2020 - created by Gold Eagle,
3 likes, 0 followers, 1 member, 3 views
With just a few thousand dollars to invest, a vehicle, and determination, you’re completely capable of starting a Aerosol cans top Cover Making Machine business and turning a profit. But starting... moreWith just a few thousand dollars to invest, a vehicle, and determination, you’re completely capable of starting a Aerosol cans top Cover Making Machine business and turning a profit. But starting a vending machine business isn’t all fun and games (though you can vend fun and games in your machine). There’s a bit of preliminary financial and logistical planning involved, too.
Even before you start researching machines or reading product reviews, take stock of your current finances—how much can you afford to invest, keeping in mind that it could take a year for a machine to become profitable? If you know how much money you’re able to invest in a new business, you’re better equipped to seek the right kind of small business financing.
And for entrepreneurs starting fresh in the vending business, determine how you want to break into your local market by visiting retailers and public places with vending facilities. Are you focused on health foods or gourmet options—or are you looking to provide more standard snack and beverage services? Maybe you want to do something other than food altogether? Answering these questions—even if your plans change later—will help direct your location and equipment search.
Finally, set realistic expectations about profits—and costs. Starting a vending business entails relatively low upfront capital, but operating it will require you to commit some time and energy into stocking, servicing, and collecting money from your machines on a regular basis. less